Slide background
Slide background
Slide background

Equipment

grant HDR100
syntron

Syntron Material Handling

Syntron Material Handling provides material handling solutions for conveying, feeding, screening, elevating, vibratory flow aids, and mining controls of bulk product.

We are committed to understanding your needs and partnering closely with you to provide solutions that improve performance and minimize operating cost.

Whether it’s enhanced optimization of existing systems or newly customized plants, our dedicated team of engineers and sales staff will provide you with the most efficient and cost-effective solutions to meet your specific material handling needs.

eiw-logo

Eagle Iron Works

For over 130 years, Eagle Iron Works has worked hard to provide a history of manufacturing quality equipment to the aggregate industry. This proud history continues into the twenty-first century with“attention to detail” fabrication and unparalleled customer support. The Eagle Iron Works’ reputation has become well known for heavy-duty, long lasting equipment able to take the punishment that is common with aggregate processing. This fact is supported by the thousands of machines that are 30, 40, and 50 years old and still in operation.


trio

Trio Engineered Products

Trio Engineered Products continues to grow as an aggressive manufacturer of crushing, vibrating, washing and conveying equipment for the aggregate, mining, recycling and mineral industries. TRIO products employ the most current design and technical expertise. Innovative engineering, advanced geometry, and superior manufacture yield a range of durable, productive, highly-efficient, and cost-effective aggregate and mining equipment.


IMG 20150831 103413

36” x 100’ Radial Stacker

Consists of:

  • Capacity; 550 STPH with 100 PCF material
  • Belt speed: 350 FPM
  • 30’-6” of lift
  • Truss design; 42” deep mid-section, 3” x 3” x 5/16” cords, 2” x 2” x 5/16” lattice
    24” deep head and tail fold sections, 3” x 3” x 5/16” cords, 2” x 2” x 5/16” lattice
  • H frame telescoping structural support legs, adjustable to maximum 30’-6” lift
  • Air brakes
  • Pintle tow hook
  • Fifth wheel plate
  • Tail end pivot anchor plate
  • 10’ Receiving hopper with clamp style flashing, 1” UHMWwear liners on wings and ½” thick AR400 wear liners on vertical side skirts
  • Tubular landing legs
  • 30 HP Electric motor, 1800 RPM, TEFC, 3ph/50Hz/575V
  • LMI 615 Shaft mount torque arm gear reducer, w/ motor mount, back stop bearing,
    V-belts, sheaves & guards.
  • 18” dia x 38” CF drive pulley, with ½” herringbone lagging, 3-7/16” dia shaft
  • (2) 3-7/16 Ring Ball medium duty pillow blocks
  • 18” dia x 38” CF Wing pulley, w/ 3-7/16" dia shaft
  • (2) 18" Hydraulic take-up
  • (2) 3-7/16" Ring Ball medium duty pillow blocks
  • (3) 36", 20˚ Impact trough idlers, CEMA C 5” dia., in loading zone
  • (6) 36", 20˚ Steel trough idlers, CEMA C 5” dia.
  • (20) 36", 35˚ Steel trough idlers, CEMA C 5” dia.
  • (10) 36", Steel return idlers, CEMA C 5” dia.
  • 36”, 3-ply 375 PIW 1/4" x 1/16" covers
  • Vulcanized belt splice
  • V-belt and sheave guard
  • Tail pulley guard
  • Side guarding as shown in pictures
  • Vent 30 Fusible starter in NEMA 4 enclosure 
  • (1) rope pull switch 120v/1ph/60Hz, cable & hardware
  • 36” Primary belt scrapper

This unit has been test run and is ready to go.

Please contact your local Grant Aggregate representative for pricing.

FOB: Sudbury.


IMG 20160511 143909

36” x 97’ Radial Stacker

Consists of:

  • Capacity; 550 STPH with 100 PCF material
  • Belt speed: 350 FPM
  • 30’-6” of lift
  • Truss design; 30” 4” x 4”x 1/4” cords, 2” x 2” x 1/4” lattice
  • Manual fold 17’ head section
  • Manual raise and lower
  • Square tubular axle assemble, manual swivel wheels and dual 11:00 x 22.5 12 ply tires
  • Telescopic axle extend
  • Pintle tow hook
  • Fifth wheel plate, swivels for tail end support plate
  • 6’-0” Receiving hopper with clamp style flashing
  • Swivel tubular landing legs
  • 25 HP electric motor, 1800 RPM, TEFC, 3ph/50Hz/575V
  • LMI 615 Shaft mount torque arm gear reducer, rigid motor mount, V-belts, sheaves & guards.
  • 18” dia x 38” CF drive pulley, with Ceramic lagging, 3-7/16” dia shaft
  • (2) 3-7/16 spherical pillow blocks
  • 16” dia x 38” CF Wing pulley, w/ 2-15/16" dia shaft
  • (2) 24” top mount take-ups
  • (2) 2-15/16" Ring Ball medium duty pillow blocks
  • (5) 36", 20˚ Steel trough idlers, CEMA C 5” dia.
  • (20) 36", 35˚ Steel trough idlers, CEMA C 5” dia.
  • (9) 36", Spool return idlers, CEMA C 5” dia
  • 36”, 3-ply 375 PIW 1/4" x 1/16" covers
  • Vulcanized belt splice
  • V-belt and sheave guard
  • Tail pulley guard.
  • Guarding painted safety yellow
  • 36” Primary belt scrapper

Please contact your local Grant Aggregate representative for pricing.

FOB: Sudbury.


IMG 20160606 110444

2 of 36” x 50’ Channel Conveyor

Consists of:

  • 8”channel construction c/w top rail (ladder design) and cross bracing
    Shipping legs only
  • 14” x 38” Drum pulley C/w ½” lagging and 2 7/16 key shaft
  • 7-1/2 HP 3/60/575V, 1800 RPM motor
  • Dodge 415 rebuilt reducer
  • Sheaves and bushing 
  • V-belt guard
  • RBL 2-7/16”medium duty bearings
  • 16” x 38” Self-cleaning wing pulley c/w 2-7/16 keyed shaft 
  • 18” Enclosed tube take-ups 
  • Tail guard
  • 16 ft of flat guarding up each side
  • 36” x 20 degree x 5” CEMA C idlers (6)
  • 36” x 35 degree x 5” CEMA C idlers (9) 
  • 36” x 5” CEMA C return rollers
  • Return roller guards
  • Metso 36” belt 3 ply x ¼ top, 375 PIW
  • Cold vulcanize

Items Not Included

  •  Pull cord switch, electrical switch gear
  • Support legs (shipping legs only)


Please contact your local Grant Aggregate representative for pricing.

FOB: Sudbury.


grizzly

10'x14' – Static Grizzly

Available on request from Grant Aggregate, 10ft x 14ft Static Grizzlys. These units are constructed for harsh applications that require the most economic means of material separation. The bolt on grizzly bars allow for optional openings and the self relieving design helps to prevent plugging. For more information, please contact your local Grant Aggregate representatives for more details.